Needle Flame Calibration Copper Block IEC 60695

Needle Flame Calibration Copper Block IEC 60695

Kit Copper Block & Thermocouple

DESCRIPTION

ORTYCB01 Needle Flame Copper Bulb and Thermocouple are used to test all the flammability devices that need to perform this calibration method, following the IEC 60695-11-4 Fig 1, IEC 60695-11-3 Fig. 1,  and other standards as UL, CSA, VDA, etc.

COMPLIANCE

_ Made of the material specified by the norm ASTM-B187 as Cu-ETP UNS C11000.

_ Diameter of the copper block: 4 mm ± 0,01 mm with a mass of 0,58 g ± 0,01 g in the fully machined and polished but undrilled state. 

The thermocouple sheathed thin wire type K (NiCr/NiAl) with an outer sheath: with a diameter of 0,5 mm.