top of page

PRODOTTO
Home / Prodotto
Martello a pendolo e kit di elementi di impatto – IEC 60068-2-75
SKU ORTYPH068
Prezzo
0,00 CA$
Wall-mounted pendulum hammer sold as base unit or as kits with striking elements up to 1 J, 10 J, 20 J or 50 J, per IEC 60068-2-75 Test Eha and IEC 62262 (IK07–IK10).
Norme
- IEC 60068-2-75 – Test Eha: pendulum hammer
- IEC 62262 – IK07, IK08, IK09, IK10
Dati tecnici
| Pendulum arm | 1000 mm, steel |
| Rilascio | Manual or electromagnetic |
| Energy range | 2 J to 50 J (0.5 J and 1 J with polyamide elements) |
| Montaggio | Rigid wall or floor stand, support mass ≥ 10 kg |
| Steel elements | Fe 490-2, HRE 80–85 |
Rif.: DNPH068 (Dunel) / ORTYPH068 (Ormity) – former codes: OTY068-BASE01
Quantità
Principio di prova e funzionamento
Base unit for Test Eha. The impact energy is defined by the interchangeable striking element and the drop height. Equivalent mass tolerance ± 2 %. Former element codes: OTY068-E02J, -E05J, -E10J, -E20J, -E50J, -E005J, -E01J, OTY068-CAL-P, OTY068-SUP-RIG.
Striking elements are also sold individually (codes above) to complete an existing installation.
Versioni e codici d'ordine
| DNPH068-01 / ORTYPH068-01 | Solo unità base |
| DNPH068-K1 / ORTYPH068-K1 | Kit fino a 1 J |
| DNPH068-K10 / ORTYPH068-K10 | Kit fino a 10 J |
| DNPH068-K20 / ORTYPH068-K20 | Kit fino a 20 J IK10 |
| DNPH068-K50 / ORTYPH068-K50 | Kit fino a 50 J |
Striking elements (IEC 60068-2-75 Table 1)
| DNPH068-E005J / ORTYPH068-E005J | 0.5 J – IK04 – 0.25 kg – polyamide |
| DNPH068-E01J / ORTYPH068-E01J | 1 J – IK06 – 0.25 kg – polyamide |
| DNPH068-E02J / ORTYPH068-E02J | 2 J – IK07 – 0.5 kg – R25 / D35 |
| DNPH068-E05J / ORTYPH068-E05J | 5 J – IK08 – 1.7 kg – R25 / D60 |
| DNPH068-E10J / ORTYPH068-E10J | 10 J – IK09 – 5 kg – R50 / D80 |
| DNPH068-E20J / ORTYPH068-E20J | 20 J – IK10 – 5 kg – R50 / D100 |
| DNPH068-E50J / ORTYPH068-E50J | 50 J – 10 kg – R50 / D125 |
| DNPH068-CAL / ORTYPH068-CAL | Pendulum calibrator |
| DNPH068-SUP / ORTYPH068-SUP | Rigid floor stand |
Kit contents (order codes)
| DNPH068-01 Base unit / ORTYPH068-01 Base unit | Wall-mounted pendulum, 1000 mm arm, release mechanism – no striking elements |
| DNPH068-K1 up to 1 J / ORTYPH068-K1 up to 1 J | Base unit + DNPH068-E005J (0.5 J, IK04) + DNPH068-E01J (1 J, IK06) – polyamide |
| DNPH068-K10 up to 10 J / ORTYPH068-K10 up to 10 J | Kit K1 + DNPH068-E02J (2 J, IK07) + DNPH068-E05J (5 J, IK08) + DNPH068-E10J (10 J, IK09) |
| DNPH068-K20 up to 20 J / ORTYPH068-K20 up to 20 J | Kit K10 + DNPH068-E20J (20 J, IK10) – complete IK04 to IK10 |
| DNPH068-K50 up to 50 J / ORTYPH068-K50 up to 50 J | Kit K20 + DNPH068-E50J (50 J, 10 kg) |
| Opzioni | Pendulum calibrator DNPH068-CAL; rigid floor stand DNPH068-SUP (when no suitable wall is available) |
Ordine, taratura e garanzia
- Tempi di consegna: fino a 35 giorni con taratura di fabbrica Ormity; fino a 60 giorni con rapporto di taratura ISO/IEC 17025 (fatturato a parte).
- Garanzia: 1 anno, più garanzia a vita contro la non conformità (escluse le revisioni delle norme pubblicate dopo la data di vendita).
- Pagamento: gli ordini internazionali sono pagati al 100% in anticipo. Tutte le vendite sono definitive dopo 30 giorni.
- Spedizione: tramite corrieri internazionali terzi; il tempo di transito dipende da destinazione, imballaggio (cassa/pallet) e percorso di taratura. Chiedete una stima di consegna prima di ordinare.
Caricamento...
Prodotti correlati
bottom of page























