top of page
ormity-logo-1600px.png
Abstract diagonal blue stripes background

PRODOTTO

Home   /   Prodotto

Micro-ugello M5 per drip box – ricambio (IPX1 IPX2)

SKU ORTYDB529-MN5
Prezzo

0,00 CA$

Micro-ugello M5 per drip box – ricambio (IPX1 IPX2)
 

Drip Box Micro-Nozzle M5 – Replacement Spare Part

 

Principio di prova e funzionamento

Threaded M5 drip micro-nozzle with an O-ring seal. It replaces worn, damaged or clogged nozzles in Ormity / Dunel IPX1 IPX2 drip box manifolds, and produces the vertically falling drops required by IEC 60529 clauses 14.2.1 (IPX1) and 14.2.2 (IPX2), Fig. 3. Each nozzle can be removed individually and cleaned in an ultrasonic bath.

 

Norme

  • IEC 60529 – 14.2.1 IPX1 and 14.2.2 IPX2, Fig. 3
  • Product standards referring to IEC 60529: IEC 60598-1, IEC 60335-1, IEC 60034-5

Dati tecnici

Parameter Value
Filettatura M5
Bore (inside diameter) Ø 0.4 mm
Tip outside diameter Ø 0.9 mm
Tip length ≤ 2 mm
Sealing O-ring (included)
Grid compatibility 20 × 20 mm nozzle spacing
Maintenance Removable; ultrasonic-bath cleanable
Compatible equipment Ormity / Dunel IPX1 IPX2 drip box manifolds with threaded M5 nozzles

Installazione

  • Hand-start the micro-nozzle into the M5 hole.
  • Tighten with a 7 mm socket 1N
  • Snug until the O-ring seats. Do not overtighten.

 

Versioni e codici d'ordine

  • ORTYDB529-MN5-100 · Pack of 100 micro-nozzles with O-rings
  • ORTYDB529-MN5-200 · Pack of 200 micro-nozzles with O-rings

 

Ordering Conditions

Sold as replacement spare parts only. The serial number (S/N) of the drip box manifold must be provided and confirmed at the time of purchase, to verify compatibility.

 

Related Products

  • IPX1 IPX2 Drip Box Tester
  • IPX1 IPX2 Integrated Test System
  • Supporto per drip box 100 kg

Opzioni

Quantità

Recensioni

Valutazione 5 stelle su 5.
Sulla base di 1 recensione
1 recensione

  • Brett02 nov
    Valutazione 5 stelle su 5.
    Micro nozzles work great

    I purchased a drip stand from Ormity a few years ago and have used it reliably ever since. During some stand maintenance the drip tester was dropped, and I needed to replace some of the micro nozzles. I got on Ormity's website and had them quoted and ordered within a few minutes and received them within 2 days. Excellent service, excellent product!

    È stata utile?
    Titolare del negozio•
    06 nov

    Thank you, Brett! We're glad to hear your drip tester has served you well over the years, and that the replacement micro nozzles got you back up and running quickly. That is exactly why we made them threaded and individually replaceable. If you ever need a recalibration of the drip rate or any other spare part, just let us know. We appreciate you taking the time to share your experience.


    The Ormity team

Scheda tecnica

Prodotti correlati

bottom of page