<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[ORMITY INC / LE GROUPE ORMITY]]></title><description><![CDATA[Manufacturer of compliance test equipment for electrical safety testing to IEC standards.]]></description><link>https://www.ormity.com/news</link><generator>RSS for Node</generator><lastBuildDate>Tue, 17 Nov 2026 23:07:04 GMT</lastBuildDate><atom:link href="https://www.ormity.com/fr-ca/blog-feed.xml" rel="self" type="application/rss+xml"/><item><title><![CDATA[A New Operator Interface for ORMITY Dust Chambers (IP5X / IP6X)]]></title><description><![CDATA[Our IP5X and IP6X dust chambers now run on a new control system, hardware and firmware alike designed and built by ORMITY. It checks every device before heating, follows the IEC 60529 end criterion by itself, shows the chamber working in real time and keeps the door locked until the dust has settled.]]></description><link>https://www.ormity.com/post/a-new-operator-interface-for-ormity-dust-chambers-ip5x-ip6x</link><guid isPermaLink="false">6afa47d11e276804b8759ade</guid><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Industrial Enclosures]]></category><pubDate>Mon, 16 Nov 2026 00:09:23 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_a48d95a004ac4414b7af72b48312d3d3~mv2.jpg/v1/fit/w_1000,h_900,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Drip Box Nozzles: Why Needles Fail and Threaded Stainless Micro-Nozzles Last (IPX1 / IPX2)]]></title><description><![CDATA[A drip box is only as good as its drip points. IEC 60529 asks for a regular grid of drops above the specimen, at a measured rainfall of 1 mm/min for IPX1 and 3 mm/min for IPX2. The manifold, the water supply and the calibration all matter, but the hundreds of small parts that actually form the drops are where most drip boxes go wrong. This technical note explains why, and why we made a different choice.]]></description><link>https://www.ormity.com/post/drip-box-nozzles-needles-vs-stainless-micro-nozzles</link><guid isPermaLink="false">6aee30d3c2ee3e3a7f2aafcc</guid><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Environmental Protection]]></category><category><![CDATA[Industrial Enclosures]]></category><pubDate>Fri, 06 Nov 2026 19:56:03 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_cb3d373088a349fa91c72ab75164c06e~mv2.png/v1/fit/w_1000,h_1000,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[NEMA Enclosure Types 3R, 4, 4X, 12 and Others: Which Test Proves Each Rating (NEMA 250 / UL 50E)]]></title><description><![CDATA[A NEMA Type is not a list of features. It is a promise that the enclosure passed a defined set of tests. A Type 3R box was tested in rain, a Type 4X box was tested under a hose and in salt spray, and a Type 12 box was tested against circulating dust. If you build or certify enclosures for North America, the Type tells you exactly which tests to run. This note goes through each Type and the test behind it, using the clause numbers of NEMA 250-2018. UL 50E and CSA C22.2 No. 94.]]></description><link>https://www.ormity.com/post/nema-enclosure-types-tests-nema-250-ul-50e</link><guid isPermaLink="false">6aeb532d9a8c4986eb170702</guid><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Environmental Protection]]></category><category><![CDATA[Industrial Enclosures]]></category><pubDate>Wed, 04 Nov 2026 15:45:49 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_217ca5e34fbe4f0bbe5994e7f033d5f9~mv2.png/v1/fit/w_489,h_303,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Technical Note 05: Reliable CTI and PTI Results to IEC 60112 – Practice in the Laboratory]]></title><description><![CDATA[Two laboratories can test the same material to IEC 60112 and report CTI values 50 V or more apart. The method is simple on paper, but it depends on details that are easy to let slip: the shape of the electrode edges, the size of the drops, the cleanliness of the solution, the timing.]]></description><link>https://www.ormity.com/post/technical-note-cti-pti-iec-60112-practice</link><guid isPermaLink="false">6aea3756bae9eebebcc9e9ad</guid><category><![CDATA[Compliance of Safety]]></category><category><![CDATA[Compliance Test Services]]></category><pubDate>Tue, 03 Nov 2026 19:34:46 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_8f2a1bd3767046149c75b700cf8f6b6e~mv2.webp/v1/fit/w_1000,h_615,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Technical Note 04: Planning an IP5X / IP6X Dust Test – Vacuum, Extraction and Chamber Sizing]]></title><description><![CDATA[Most of the decisions that make a dust test valid are taken before the chamber door closes: which category applies, where the vacuum is connected, what extraction rate the enclosure allows, how long the test will last and whether the specimen fits the chamber.]]></description><link>https://www.ormity.com/post/technical-note-ip5x-ip6x-dust-test-planning</link><guid isPermaLink="false">6aea3754c9089253500afc0f</guid><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Industrial Enclosures]]></category><pubDate>Tue, 03 Nov 2026 19:34:44 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_b3df04bc8c7e491883217cebe7a35317~mv2.png/v1/fit/w_629,h_675,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Technical Note 03: Glow-Wire Apparatus Verification and GWFI / GWIT Test Planning]]></title><description><![CDATA[A glow-wire result is a temperature and a few seconds of observation. Small errors in temperature, force or timing move a material from pass to fail, and the differences between laboratories testing the same material are well known to anyone who has compared reports.]]></description><link>https://www.ormity.com/post/technical-note-glow-wire-verification-gwfi-gwit</link><guid isPermaLink="false">6aea37537038d7ecf87d3f6d</guid><category><![CDATA[Flammability Tests]]></category><category><![CDATA[Compliance of Safety]]></category><pubDate>Tue, 03 Nov 2026 19:34:43 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_bfd572abdd2d40c3ac6ddff3e0176a35~mv2.png/v1/fit/w_1000,h_1000,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Technical Note 02: Verifying IPX3–IPX6 Handheld Nozzles and Water Flow]]></title><description><![CDATA[Every handheld water test in IEC 60529 is defined by a flow with a ±5 % tolerance and by a nozzle geometry. Neither stays right by itself: flow meters drift, supplies fluctuate, orifices wear and spray holes clog.]]></description><link>https://www.ormity.com/post/technical-note-ipx3-ipx6-nozzle-flow-verification</link><guid isPermaLink="false">6aea3752e6cd3b837a20f95a</guid><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Environmental Protection]]></category><pubDate>Tue, 03 Nov 2026 19:34:42 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_33e485a170ce4f229416ce71ea40a8cf~mv2.png/v1/fit/w_1000,h_1000,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Technical Note 01: Verifying the Rainfall of an IPX1 / IPX2 Drip Box]]></title><description><![CDATA[IEC 60529 defines the IPX1 and IPX2 tests by a rainfall rate: 1 (+0.5) mm/min and 3 (+0.5) mm/min. A drip box that has never been measured is a drip box of unknown rainfall, and any result obtained with it can be challenged in an audit.]]></description><link>https://www.ormity.com/post/technical-note-drip-box-rainfall-verification</link><guid isPermaLink="false">6aea374f45f0aaa1eb83531c</guid><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Environmental Protection]]></category><pubDate>Tue, 03 Nov 2026 19:34:39 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_3ade90fe3c00467aa6c1c895217ae954~mv2.png/v1/fit/w_1000,h_1000,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[IP5X and IP6X Dust Testing: Category 1 vs Category 2 and How to Size a Dust Chamber]]></title><description><![CDATA[Of the IEC 60529 ingress tests, the dust test is the one with the most variables to control. The specimen sits in a cloud of fine talc for hours, and the result depends on how uniform the cloud is, whether the enclosure is put under vacuum, and how much of the chamber the specimen occupies.]]></description><link>https://www.ormity.com/post/ip5x-ip6x-dust-test-chamber-sizing</link><guid isPermaLink="false">6aea2f1903fdba6f9b9e0e52</guid><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Environmental Protection]]></category><category><![CDATA[Industrial Enclosures]]></category><pubDate>Tue, 03 Nov 2026 19:12:51 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_7ece7a4aaa1541e59e19c171f58259f6~mv2.png/v1/fit/w_786,h_1000,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[CTI and PTI Testing to IEC 60112: How a Tracking Test Apparatus Works]]></title><description><![CDATA[When an insulating surface is wet and contaminated, small leakage currents can flow between conductors. Over time they carbonise the surface and form a conductive path: this is tracking. The comparative tracking index (CTI) measures how well a solid insulating material resists it. Designers use the CTI to choose materials and to determine creepage distances, which is why the value appears in material datasheets, in insulation coordination tables and in certification files.]]></description><link>https://www.ormity.com/post/cti-pti-tracking-test-iec-60112</link><guid isPermaLink="false">6aea2f18c9089253500ae6f2</guid><category><![CDATA[Compliance of Safety]]></category><category><![CDATA[Compliance Test Services]]></category><pubDate>Tue, 03 Nov 2026 19:12:51 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_8f2a1bd3767046149c75b700cf8f6b6e~mv2.webp/v1/fit/w_1000,h_615,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Glow-Wire Testing to IEC 60695-2: GWEPT, GWFI and GWIT Explained]]></title><description><![CDATA[Overheated connections, failing components and overloaded contacts can turn a small part of an electrical product into a hot spot. The glow-wire test simulates that situation: a heated wire loop is pressed against the material or the finished part, and the laboratory observes whether it ignites, how long it burns and whether burning droplets could spread fire. It is required by many product standards, including IEC 60335-1 (household appliances), IEC 60598-1 (luminaires), IEC]]></description><link>https://www.ormity.com/post/glow-wire-test-iec-60695-gwfi-gwit</link><guid isPermaLink="false">6aea2f17bc7fa2636a716958</guid><category><![CDATA[Flammability Tests]]></category><category><![CDATA[Compliance of Safety]]></category><category><![CDATA[Compliance Test Services]]></category><pubDate>Tue, 03 Nov 2026 19:12:51 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_a6f90988a484407b9c9bfb535c0e7839~mv2.png/v1/fit/w_944,h_696,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[IPX1 and IPX2 Drip Test: How to Choose and Size a Drip Box (IEC 60529)]]></title><description><![CDATA[The dripping water tests are the first two levels of water protection in IEC 60529. IPX1 checks protection against vertically falling drops; IPX2 checks protection against drops when the enclosure is tilted up to 15°. The set-up is simple, but two points are often overlooked: the drip box must cover the specimen during its movement, not only at rest, and the rainfall must be measured.]]></description><link>https://www.ormity.com/post/ipx1-ipx2-drip-test-drip-box</link><guid isPermaLink="false">6aea2f1703fdba6f9b9e0e4d</guid><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Environmental Protection]]></category><category><![CDATA[Industrial Enclosures]]></category><pubDate>Tue, 03 Nov 2026 19:12:50 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_6d854c9abb254bfda37fe0822022b8fb~mv2.png/v1/fit/w_535,h_481,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[IPX3, IPX4, IPX5 and IPX6 Test Nozzles: A Practical Guide to IEC 60529 Handheld Water Tests]]></title><description><![CDATA[Handheld nozzles are the most widely used water-ingress tools in IEC 60529 testing. They cover four of the second-numeral codes: IPX3 (spraying water), IPX4 (splashing water), IPX5 (water jets) and IPX6 (powerful water jets). They are used mainly where the specimen is too large, too heavy or permanently installed to go under an oscillating tube or into a chamber.]]></description><link>https://www.ormity.com/post/ipx3-ipx6-test-nozzles-iec-60529</link><guid isPermaLink="false">6aea2f16c9089253500ae6ed</guid><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Environmental Protection]]></category><category><![CDATA[Compliance of Safety]]></category><pubDate>Tue, 03 Nov 2026 19:12:50 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_d14f3c52af154e93bc26c81bbfd13df1~mv2.jpg/v1/fit/w_1000,h_1000,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[IPX1 / IPX2 Drip Box Sizing Tool (IEC 60529)]]></title><description><![CDATA[Sizing the right drip box for IPX1 and IPX2]]></description><link>https://www.ormity.com/post/ipx1-ipx2-drip-box-sizing-guide</link><guid isPermaLink="false">6a8f3b6943291b05ec025f37</guid><category><![CDATA[Compliance Test Services]]></category><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Environmental Protection]]></category><category><![CDATA[Compliance of Safety]]></category><category><![CDATA[Industrial Enclosures]]></category><pubDate>Fri, 14 Aug 2026 01:25:47 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_75e56a38cb8a43d4a757ff0557cf61cb~mv2.png/v1/fit/w_1000,h_1000,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[High-Performance IPX Test Equipment: Technical Considerations for Reliable Compliance]]></title><description><![CDATA[In product manufacturing and certification, precision is not optional—it is fundamental. This is particularly true for IPX testing, where even minor deviations in test parameters can lead to non-compliance or misleading results. Ensuring that products withstand water exposure under defined conditions requires not only adherence to IEC 60529, but also the use of properly designed and calibrated equipment. This article provides a technical overview of IPX test equipment, its role in compliance...]]></description><link>https://www.ormity.com/post/high-performance-ipx-test-equipment-technical-considerations-for-reliable-compliance</link><guid isPermaLink="false">6a8f3b6943291b05ec025f36</guid><pubDate>Tue, 14 Apr 2026 14:43:08 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_6d854c9abb254bfda37fe0822022b8fb~mv2.png/v1/fit/w_535,h_481,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Driving Operational Excellence: Test Optimization in High-Performance Environments]]></title><description><![CDATA[In the world of manufacturing and certification, precision is not a goal—it is the foundation of the business. However, the modern challenge lies in the balance: how do you maintain rigorous analytical standards under the pressure of shrinking production timelines? Test Optimization in High-Performance Environments The answer is not to work harder, but to restructure the testing architecture. Test optimization, powered by strategic tools, is the dividing line between overwhelmed laboratories...]]></description><link>https://www.ormity.com/post/driving-operational-excellence-test-optimization-in-high-performance-environments</link><guid isPermaLink="false">6a8f3b6943291b05ec025f35</guid><pubDate>Sat, 11 Apr 2026 12:30:45 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_572eb5f06dde4c7b8406ea8582f526c8~mv2.png/v1/fit/w_1000,h_768,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Evolution of Sand and Dust Testing in MIL-STD-810: From Empirical Exposure to Controlled Environmental Simulation]]></title><description><![CDATA[Environmental testing for sand and dust exposure, as defined in MIL-STD-810 Method 510, has evolved from relatively simple exposure procedures into controlled environmental simulations grounded in fluid dynamics, particle transport, and system-level reliability considerations. The progression from MIL-STD-810A through MIL-STD-810H reflects not only procedural refinement, but also a fundamental shift in testing philosophy—from qualitative exposure toward repeatable, application-tailored...]]></description><link>https://www.ormity.com/post/mil-std-810sandanddust</link><guid isPermaLink="false">6a8f3b6943291b05ec025f34</guid><pubDate>Fri, 20 Mar 2026 04:00:00 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_2db5770fe7c1434d93e360e40098fa93~mv2.png/v1/fit/w_1000,h_1000,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Where Precision Meets Survival: Inside the New Ormity Stainless Steel Series]]></title><description><![CDATA[Engineering that survives the real world. The new Ormity stainless steel series is built to withstand extreme industrial environments, from fine talcum dust defined in IEC 60529 to abrasive mineral particles referenced in MIL-STD-810 and IEC 60068. Designed for durability, sealing integrity, and uncompromising performance where reliability matters most.]]></description><link>https://www.ormity.com/post/where-precision-meets-survival-inside-the-new-ormity-stainless-steel-series</link><guid isPermaLink="false">6a8f3b6943291b05ec025f33</guid><category><![CDATA[Industrial Enclosures]]></category><category><![CDATA[Compliance of Safety]]></category><category><![CDATA[Environmental Protection]]></category><category><![CDATA[Ingress Protection Degress]]></category><pubDate>Tue, 10 Mar 2026 04:00:00 GMT</pubDate><enclosure url="http://video.wixstatic.com/video/d893e5_985846d8ba3247b9980efca0f5264c60/720p/mp4/file.mp4" length="0" type="video"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[Ingress Protection Testing Explained]]></title><description><![CDATA[Ingress protection testing is often associated with IEC 60529, but the reality is far more complex. This article explains how IP testing equipment connects a global network of standards including NEMA 250, UL 50E, ISO 20653 and MIL-STD-810, and why the same laboratory equipment serves multiple industries.]]></description><link>https://www.ormity.com/post/ingress-protection-testing-explained</link><guid isPermaLink="false">6a8f3b6943291b05ec025f32</guid><pubDate>Wed, 04 Mar 2026 05:00:00 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_b183c988110d44de8714f397085f5f5a~mv2.png/v1/fit/w_1000,h_907,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item><item><title><![CDATA[IP5X &#38; IP6X Dust Test Chambers – IEC 60529 Titan Series]]></title><description><![CDATA[Advanced Embedded Technology, Ultra-Low Noise, and Intelligent Expansion Redefine IP5X / IP6X Testing This March marks a significant milestone in environmental testing engineering. Ormity officially introduces the new DNDC529 IP5X IP6X Titan Series Dust Test Chambers, with the first units already being installed in Canada, the United States, and Europe. Designed and manufactured in Canada, the Titan Series sets a new benchmark for dust ingress testing under IEC 60529 (IP5X / IP6X) and ISO...]]></description><link>https://www.ormity.com/post/ip5x-ip6x-dust-test-chambers</link><guid isPermaLink="false">6a8f3b6943291b05ec025f31</guid><category><![CDATA[Ingress Protection Degress]]></category><category><![CDATA[Environmental Protection]]></category><category><![CDATA[Industrial Enclosures]]></category><pubDate>Fri, 20 Feb 2026 05:00:00 GMT</pubDate><enclosure url="https://static.wixstatic.com/media/d893e5_2a216ecab79446afadeffdb447691f82~mv2.png/v1/fit/w_896,h_1000,al_c,q_80/file.png" length="0" type="image/png"/><dc:creator>Ormity Inc.</dc:creator></item></channel></rss>